Windguru

Register new Windguru Station

Get ready! You are going to upgrade yourself to Guru :-)

Station type: Enter the MAC address (Station 2) or IMEI number (GSM station):

The MAC is written on the label that is attached on the side of the indoor unit (12 characters) , or (in case of GSM station) there is an IMEI label on the unit

Enter WOSPi ID of your station:

This will be the unique ID to identify your station in our database, use the same ID in your WOSPi configuration file

Enter Meteobridge ID of your station:

This will be the unique ID to identify your station in our database
you will then enter the same string as "User Name" in your Meteobridge Windguru upload configuration show example

Enter WeeWX ID of your station:

This will be the unique ID to identify your station in our database, use the same ID in your WeeWX configuration

Enter WindChilly ID of your station:

This will be the unique ID to identify your station in our database, use the same ID in your WindChilly configuration file

Enter 1chip.ru ID of your station: Enter the ID of your Holfuy station (number): Enter the UID of your station (unique string that identifies your upload):

Choose whatever you want, you will then use this as the uid variable in the upload (see upload API documentation)

Windguru station key (autogenerated):

Key to identify your station upload, you will use this in the station "custom upload" configuration

Ambient API key:

You need to generate it at your ambient account, then copy and paste here

MAC address of the station:

The MAC is written ....

Enter the MeteoStar ID of your station: Choose station's alternative login name:

You can always use your station MAC address to login, but if you prefer something easier to remember then you can choose an alias here...

You can always use your Windguru station key to login, but if you prefer something easier to remember then you can choose an alias here...

Enter your Holfuy Windguru station key:

you need to get this key from your Holfuy admin page

Choose password:

You will use this password for editing and managing this station later
You will also need to enter the same as "Password" in your Meteobridge Windguru upload configuration show example

Upload interval:

Expected upload frequency in seconds, 60 (1 minute) is ideal, but no problem to upload less frequently if this is not possible...

Your email: Position on map:

Latitude:

Longitude:

Please try to pick the place precisely, as much as possible. You can also enter latitude and longitude directly.

Timezone: Country: Spot name:

Spot at which the station is installed (common / geographic name of the place)

Name your station:

Use short name, you can add longer description in the other fields below...

Station description:

If you like type more info about your station here. Where it is located, if there are some limits (like wind shadow from some direction) etc.

Height of the anemometer (meters above surface): Anemometer direction calibration (degrees):

Leave this field empty:
- if the anemometer is installed normally (the arm points north = 0°)
- if the arm does not point north but you already made the calibration in the station internal website

If the anemometer arm does not point north and you did not calibrate it in the station internal website then you can calibrate it here, in this case enter the direction in which the anemometer arm is installed as degrees. For example if it points east then enter 90, south: 180 etc...
Do not calibrate direction both here and in the station internal web, otherwise the station will record wrong wind directions

Altitude of the station (meters above sea level): Your Windguru username:

This user will be upgraded to PRO (as long as windguru receives data from this station). It must be an existing windguru username, if you don't have windguru user account yet please create one here. Note: It may take up to one hour to activate the PRO (since first station data received).

Limit websites that are allowed to display widgets:

Leave this field empty if you want to allow anybody (recommended). If you want to allow only your website enter it's domain name. If you want to allow more sites separate entries by comma. (Note: all windguru related websites are allowed automatically).
Example:
www.mysite.com, mysite.com, www.myothersite.com

Your tips for interesting services available on this spot: Choose API password:

If you are planning to use the station data API, it's recommended to choose a special password for it (different from the station admin password)

Please enter this number: 905 to the field below (antispam) Agreement I agree that Windguru is allowed to work with the measured data anyhow.